nickgarthright Posted September 6, 2016 Share Posted September 6, 2016 Hey guys, I've got an rb26dett in my z car and for some reason the consult plug doesn't work. I've checked the wiring about 1000 times and its correctly wired per the ecu pin-out diagrams and from what other members say it should be wired. It has 12v power, ground is grounded, the Rx has about 10v, Tx about 10v, and clk 0V. So the weird thing there is that Tx is supposed to have 0V. The other voltages are correct besides the Tx; I checked the wire and it's wired to the Tx pin on the ecu. I'm lost here and have no clue what my next step should be. Quote Link to comment Share on other sites More sharing options...
mtnickel Posted September 6, 2016 Share Posted September 6, 2016 What consult connector are you using? Have you verified that the actual consult USB device works correctly? Driver installed? Quote Link to comment Share on other sites More sharing options...
nickgarthright Posted September 6, 2016 Author Share Posted September 6, 2016 What consult connector are you using? Have you verified that the actual consult USB device works correctly? Driver installed? Its the nissan obd1 plug and I'm borrowing my friends obd1 to usb plug that he used to tune his rb25 so I know that works. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.