turbogrill Posted July 26, 2018 Share Posted July 26, 2018 Hi, I have a freshly built engine with damaged pistons and scratched cylinder walls. My plan is to remove the crank and have it bored for new pistons. I can still reuse the main and rod bearings right (as long as they are in spec)? Removing the crank, rebore and press on new pistons shouldn't hurt the bearings. Or are they one-time-fit only? I will also reuse my ARP rodbolts, this is ok according to manufacturer. Someone told me you can't, I can see how you typically replace those while you have everything apart but in my case they are "brand new". Quote Link to comment Share on other sites More sharing options...
madkaw Posted July 26, 2018 Share Posted July 26, 2018 I’d do it! Just put them back in same order and plastigage . Of course clean and inspect them. If everything spins freely your good Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.