dragonsamry7 Posted March 14, 2019 Share Posted March 14, 2019 hello everyone I'm new to this forum and was wondering what kind of setup everyone is using for ungraded suspension parts on their 280ZXs? i haven't had much luck finding anything in terms of struts/ coilovers that work, and am curious as to what everyone has done Quote Link to comment Share on other sites More sharing options...
G-Tech Posted March 14, 2019 Share Posted March 14, 2019 (edited) i started with eibach lowereing springs and tokico shock and struts. then went with ground control weld-in coilovers up front and just cut a rear coil in the back. now i have techno toys coil overs all around. i have nothing bad to say about all their products. if you have or ever do a v8 swap in it then the rear springs will NEED to be stiffer, the car squats real good especially with any v8 i did use coilovers from a 240sx(i forget which year but there is topics on it), they will only fit the rear. they might be fine if you dont have alot of horsepower but i found that it cut down on the amount of travel the rear had and i was bottoming out the coilover when i launched hard. Edited March 14, 2019 by G-Tech Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.