AydinZ71 Posted November 12, 2020 Share Posted November 12, 2020 (edited) Hi all! I am about to pull the trigger on this unit. It is a stock S15 type-R (JDM) center section. I currently have a stock R200 3.545 open diff from a 280z, with 280z half-shafts installed on a series 1 240z. Can anyone verify that my 280z halfshafts will slide right into this unit once installed? I am prepared to address the M10 vs M12 bolt issue, and already have a source for sleeve stock. Thanks so much for your help!! https://www.ebay.com/itm/Nissan-silvia-S15-Helical-LSD-HLSD-also-Fits-S14-S13/324250818322?hash=item4b7edad712:g:esEAAOSwJgRfKcvn Edited November 12, 2020 by AydinZ71 Quote Link to comment Share on other sites More sharing options...
AydinZ71 Posted November 12, 2020 Author Share Posted November 12, 2020 Just now, AydinZ71 said: Hi all! I am about to pull the trigger on this unit. It is a stock S15 type-R (JDM) center section. I currently have a stock R200 3.545 open diff from a 280z, with 280z half-shafts installed on a series 1 240z. Can anyone verify that my 280z halfshafts will slide right into this unit once installed? I am prepared to address the M10 vs M12 bolt issue, and already have a source for sleeve stock. Thanks so much for your help!! https://www.ebay.com/itm/Nissan-silvia-S15-Helical-LSD-HLSD-also-Fits-S14-S13/324250818322?hash=item4b7edad712:g:esEAAOSwJgRfKcvn PS: this is for the SCCA car to keep it group EP. The L28et 71' will still be getting Wlad's super 8.8 swap. Quote Link to comment Share on other sites More sharing options...
NewZed Posted November 12, 2020 Share Posted November 12, 2020 I did a Google and found this. I'd wait and confirm. One's from Hybridz. Not looking good. https://zilvia.net/f/showthread.php?t=50158 https://www.google.com/search?rlz=1C1SQJL_enUS862US862&sxsrf=ALeKk012kyI3OARbRxjn53vqXgsMBXC7CQ%3A1605209360066&ei=EI2tX8fJA9ba-gTFpY7gCQ&q=S15+Helical+LSD+spline+shaft&oq=S15+Helical+LSD+spline+shaft&gs_lcp=CgZwc3ktYWIQAzIFCCEQoAEyBQghEKsCMgUIIRCrAjoECAAQRzoHCCMQrgIQJzoICCEQFhAdEB46BwghEAoQoAFQhT1Y4FFgoVNoAHACeACAAWyIAe4IkgEEMTEuMpgBAKABAaoBB2d3cy13aXrIAQbAAQE&sclient=psy-ab&ved=0ahUKEwjHkcnt3v3sAhVWrZ4KHcWSA5wQ4dUDCA0&uact=5 Quote Link to comment Share on other sites More sharing options...
AydinZ71 Posted November 12, 2020 Author Share Posted November 12, 2020 Bummer thanks man! I’m glad I checked before I purchased. Looks like this is one of the few that do not work with stock input flanges. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.