Jump to content
Sign in to follow this  

1974.5 260z left window regulator and front guide

Recommended Posts

My 260 did not have right side glass or parts inside the door when I brought it home.  I tried window parts from a 73 240 and they were NOT the same and would not fit.  I finally located a 260 regulator, etc that I needed.  Have you removed your glass, regulator and track to clean and lube it?   Over time, these parts get gunked up with dirt etc. and I suspect this is your only problem.  Both windows on my 78 280 were very hard to roll up or down but after a good cleaning, etc, they work like new.  They aren't that complicated.   When you are in there you can lube the door lock parts and they should also work much better.  I used old school white grease but their may be better products to use.  A factory service manual has good daigrams and instructions that can help understand you window parts.     

Edited by Mayolives

Share this post

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Create New...