350zr Posted December 11, 2023 Share Posted December 11, 2023 But these wheels from JohnC almost 20 years ago now, I just had them in to a wheel place to have them polished clean and redone, the problem is they lost several of the nuts and bolts that go into this, we're not having a problem where we look everywhere, and even Fikse doesn't seem to know what the nut size was that they used on these almost 20 years ago. Is there anyone out there that has a set of the Fikse wheels, with the nuts on the outer face? Am I the only person that ever bought these? JohnC had said that this was the one that he put on most of the Z cars that he built so I'm hoping that there's more of these out there. Quote Link to comment Share on other sites More sharing options...
jhm Posted December 11, 2023 Share Posted December 11, 2023 Could you just get a thread size checker like this, and figure it out that way? https://www.amazon.com/Nut-Thread-Checker-Complete-Metric/dp/B09LH877TB/ref=asc_df_B09LH877TB/?tag=hyprod-20&linkCode=df0&hvadid=563795747675&hvpos=&hvnetw=g&hvrand=3578390821976184060&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9008585&hvtargid=pla-1601440163251&psc=1&mcid=e26284c6ca473f63bb4aac48facbc55a Quote Link to comment Share on other sites More sharing options...
calZ Posted December 12, 2023 Share Posted December 12, 2023 Or use a set of calipers? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.