280z-racer Posted November 13, 2002 Share Posted November 13, 2002 does anyone know of or have one?? i really need it for my new injectors Quote Link to comment Share on other sites More sharing options...
rags Posted November 13, 2002 Share Posted November 13, 2002 I'll tell ya how I had mine made. I bought a two foot length of stock from Kinsler. I then took it, my manifold, and a fuel rail from a TPI setup to a machine shop. I asked them to bore out the injector bosses to accept the o-ring injectors, and bore corresponding holes in the rail stock. I used the TPI rail for measuring the hole size. I then had two rail mounts made to secure the rail to the manifold at the stock mounting locations. No leaks and $70 total. Joe Quote Link to comment Share on other sites More sharing options...
jeffp Posted November 14, 2002 Share Posted November 14, 2002 Jim Wolf Technology has a oring fuel rail, and a FPR to go with the rail that is agjustable to 4 bar. Not a bad setup and it is plug and play on the L series engines. Tell them Jeff Priddy sent you. Quote Link to comment Share on other sites More sharing options...
280z-racer Posted November 15, 2002 Author Share Posted November 15, 2002 i found it difficult to talk to someone at JWT. do you have a part number or the location of it on the website?? Quote Link to comment Share on other sites More sharing options...
SHANE Posted November 16, 2002 Share Posted November 16, 2002 when i checked it was over 400.00 for the rail and regulator. i guess you have to use their regulator with their rail. Quote Link to comment Share on other sites More sharing options...
Guest De Schmaydee Posted November 19, 2002 Share Posted November 19, 2002 ....i have 2 of 'em.....s Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.