Guest Anonymous Posted February 17, 2003 Share Posted February 17, 2003 Hey for about 4 month now I wanted to do a 5.0 swap into a Datsun. I only found one site (of a nice yellow convertable 5.0) and 2 other picture of these engine swaps. Does any one have pictures/sites of their (5.0) Z. Thanks Kenneth K. Quote Link to comment Share on other sites More sharing options...
blueovalz Posted February 17, 2003 Share Posted February 17, 2003 Not the most popular method of installation, but being nobody replied, this should be better than nothing. Click on the link below. Then you can view the album that deals with the motor on the left side listings of albums. Quote Link to comment Share on other sites More sharing options...
Dp351zcar Posted February 17, 2003 Share Posted February 17, 2003 A ford can be put in many diffrent ways you just have to think about what you want to do with the car and what would be best for you. It go from being done with motor mount plates like the JTR ones (for a chev) to engine plates like BlueovalZ. I think a guy here makes a crossmember for a SBF (Al Seliva??). Here is a link to somebody did is cheap.http:// http://datsun.getyours.com/v8/Ford_302/ford_302.htm I could send some pictures on how I did it but mine is not running yet. Let me know. Don Quote Link to comment Share on other sites More sharing options...
Guest bobs302z Posted February 18, 2003 Share Posted February 18, 2003 I have some completed pic here (http://members.shaw.ca/rguido/) under family cars. I used 1 inch pipe to make a cross member like the other posts said there are losts of good ways depends on what you are using car for. Have fun with it you will enjoy finished product.. Quote Link to comment Share on other sites More sharing options...
Guest Anonymous Posted February 18, 2003 Share Posted February 18, 2003 thanks.... Quote Link to comment Share on other sites More sharing options...
Guest Anonymous Posted February 18, 2003 Share Posted February 18, 2003 Does anyone have videos of there v8 ford Z. I only seen chevy videos and there nice but never found ford conversions. Thanks again Ken K. Quote Link to comment Share on other sites More sharing options...
Jumbo240ez Posted February 20, 2003 Share Posted February 20, 2003 here are some pics... http://photos.yahoo.com/bc/jumbo30@sbcglobal.net/lst?.dir=&.view=t Lates jon Quote Link to comment Share on other sites More sharing options...
Jumbo240ez Posted February 20, 2003 Share Posted February 20, 2003 if you can get these to work there ya go... http://dazzle.mightyeyes.com/my/my_isees.asp Quote Link to comment Share on other sites More sharing options...
73BOTIZ Posted February 20, 2003 Share Posted February 20, 2003 Here is a pic of one that I make for Hybridz member Alsil. Al did a lot of measuring and fitting to install a 5.0 in the optimum position. If you are interested in one, you can contact Alsil or me. Mike D.http://groups.msn.com/73BOTIZ/73datsunv8240z.msnw?action=ShowPhoto&PhotoID=86 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.