Z-Gad Posted February 20, 2003 Share Posted February 20, 2003 I recently purchased a new turbo. I was trying to identify the compressor wheel. I checked the turbonetics web site, but couldn't find anything... I used dial calipers and came up with the following. The major diameter of the wheel is roughly 3.58" or ~ 90mm The minor diameter is roughly 2.68" or ~ 68mm Can anyone help me out on this one? thanks in advance, mike Quote Link to comment Share on other sites More sharing options...
SleeperZ Posted February 20, 2003 Share Posted February 20, 2003 That's REALLY big. I didn't see an exact match, but it looks like a T66! Here's the Turbonetics link: http://64.225.76.178/main.htm Quote Link to comment Share on other sites More sharing options...
Z-Gad Posted February 20, 2003 Author Share Posted February 20, 2003 Thanks SleeperZ, I was looking under the wrong link (turboneticsinc.com) You are right, it is near the T-66 size!! We'll see how it does once I get the right turbine housing. It came with an .81 a/r and I have been instructed to go with the .56 a/r. Quote Link to comment Share on other sites More sharing options...
240Z Turbo Posted February 20, 2003 Share Posted February 20, 2003 Mike, looks to be a T66 compressor wheel. Inducer(2.580") Exducer(3.584") Your inducer is .100" bigger so is safe to say you have a turbo somewhat equivalent, if not exact, to a T66 compressor wheel. Good turbo in my opinion for a NASTY setup! Better get some better tires and bigger injectors my friend! Quote Link to comment Share on other sites More sharing options...
scottyMIz Posted February 20, 2003 Share Posted February 20, 2003 hey i got a t60 wheel well i know now i have a t4e with a .70ar and a t60 wheel whooo hooooo. Thanks for the link sleeper i was looking for one. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.