Corzette Posted March 1, 2003 Share Posted March 1, 2003 When I install the lifters, does the bar connecting the two lifters face upward to the sky or down towards the block when inserting? CorZette Quote Link to comment Share on other sites More sharing options...
Mike C Posted March 1, 2003 Share Posted March 1, 2003 The link bar between the roller lifters, correct? It should be toward the center of the block and not towards the sides if I understand your question... Quote Link to comment Share on other sites More sharing options...
Mudge Posted March 2, 2003 Share Posted March 2, 2003 Eventually the lifters sink almost completely into the lifter bore, they are spring loaded right? The base of the lifter vs the top should also look pretty different, since the pushrods go on top of the lifter, they need a method to stay in there, vs the bottom of the lifter which is either a roller or flat bottom. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.