Synlubes Posted March 3, 2003 Share Posted March 3, 2003 I`m looking at one of these to replace the air dam that I now have. This is going on a car that is used 90% of time on track. So it needs to be able to hold up to high speed wind forces pushing against it.(I`m sure some bracing will be used to stiffen it up some) I am NOT concerned about turn signal mounting * Questions: How is the quality? Is the fiberglass thick or thin? Did it fit well or was mounting a problem? If any of you have these on you car and have good closeup front photo`s, please e-mail me some pics. I would also like to hear your opinions on part / install. Quote Link to comment Share on other sites More sharing options...
zguy95135 Posted July 15, 2003 Share Posted July 15, 2003 i odnt have one, but, i have seen some before. they should be strong enough and they are good quality. the fiberglass is almost an inch thick. i think. Quote Link to comment Share on other sites More sharing options...
Georgia Flash Posted July 16, 2003 Share Posted July 16, 2003 I have this front piece and also the rear and side skirts. I haven't put the front on yet so I can not tell you how easily it installs but I can tell you that it isn't an inch thick. The rear went on pretty easily but there are gaps that will have to be filled in. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.