jgkurz Posted July 9, 2003 Share Posted July 9, 2003 Hi folks, I have always assumed that my JWT Sport 400 used a .60 A/R compressor housing. After closer inspection I noticed mine is a .50 A/R. Is that the size on your JWT turbo also? Assuming the larger .60 A/R would increase the external size of the housing I don't know how it would fit on the L28ET without a spacer. I currently have 1/8" clearance from my exhaust manifold. Thanks, Quote Link to comment Share on other sites More sharing options...
Doug71zt Posted July 9, 2003 Share Posted July 9, 2003 I have a .75" spacer on my TO4E .60 a/r compressor - the stock heat shield fits well. Hot end is a turbonetics/ford T3 .63 a/r stage 3 Cheers- Doug Quote Link to comment Share on other sites More sharing options...
yo2001 Posted July 9, 2003 Share Posted July 9, 2003 Ask Lcokjaw. He's running a spacer with his JWT450 Quote Link to comment Share on other sites More sharing options...
SleeperZ Posted July 9, 2003 Share Posted July 9, 2003 Pretty sure Shane had to run a spacer with his JWT 450 kit. Quote Link to comment Share on other sites More sharing options...
Lockjaw Posted July 10, 2003 Share Posted July 10, 2003 I have a spacer, 1/2 inch, and I do have a 60 AR housing. No problems in the ZX. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.