EvilC Posted May 6, 2013 Share Posted May 6, 2013 I see what you mean. That is why I said depends on how much camber you are running and ride height. I ran mine for some time without the stops just to see if the axles will fail and they didn't. This wasn't at the track which was the only place I was getting the banging sound you are talking about. Another member here was having your same issue and welded up stops in the cage itself and seems to still be working ok. With your setup I am curious of how that would look once the axles starts to move at an angle relative to the valve spring. Hey this is HBZ try it out and report back! =) Link to comment Share on other sites More sharing options...
Bigdeezs Posted May 6, 2013 Share Posted May 6, 2013 Thanks for the heads up Clive...That axle angle combined with cornering forces is exactly why I dont have much faith in this spring idea. I considered welding a ring in the CV housing itself to stop the balls from popping out but my buddy suggested the spring idea to me and I figure since i have some stock LS1 valve springs sitting around may as well put em to use. Hopefully this will shush up that knocking too Link to comment Share on other sites More sharing options...
Recommended Posts