buZy Posted April 8, 2005 Share Posted April 8, 2005 What is a good custom sway bar source for a 240z. Maybe someone who is particular to Z cars in general? Or a source that has knowledge of AZ car front adjustable cars? Thanks everyone! Brian Quote Link to comment Share on other sites More sharing options...
peej410 Posted April 8, 2005 Share Posted April 8, 2005 http://www.hrpworld.com/index.cfm?form_cat_id=757&action=category those are the only custom sway bars i know of. they are awesome we used one on the porsche 914 race car my boss runs Quote Link to comment Share on other sites More sharing options...
dot Posted April 8, 2005 Share Posted April 8, 2005 Crawl under the new Mustang. I did and found a sway bar that has the right shape but am not too sure if the length is good. Should be. It's almost 1 1/4" in diameter. Quote Link to comment Share on other sites More sharing options...
240Z2NV Posted April 9, 2005 Share Posted April 9, 2005 Very expensive; but, this place does the primo stuff..... http://sanerperffab.com/products.htm Also, 240SX SE ('95 I believe) front sway bar is VERY close to OE shape. Very large diameter, and HOLLOW, so it's super light. Also has the nice end links that Terry (BlueovalZ) recommends. It will require drilling and tapping four new holes in the area of the frame rail that the OE unit goes...hopefully you have already reinforced that area with a thick piece of angle steel anyway. It is prone to ripping out at the sway bar mounts. Quote Link to comment Share on other sites More sharing options...
evildky Posted April 9, 2005 Share Posted April 9, 2005 there is a company that advertises in GRM I think it was Adco? they will make custom bard for about $200 as I recall Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.