hat1324 Posted August 25, 2005 Share Posted August 25, 2005 The floorboard on my passenger side is pretty good as far as rust goes, but I want to get this Rubber mat off of the floor.. Ive scraped it with a razer and even melted it with my grinder.. im not working on it right now, so im wondering an other ideas... Quote Link to comment Share on other sites More sharing options...
Guest iskone Posted August 25, 2005 Share Posted August 25, 2005 Tolulene, Xylene, etc. or blow torch Isk Quote Link to comment Share on other sites More sharing options...
pparaska Posted August 25, 2005 Share Posted August 25, 2005 Pour dry ice on the floor and spread it out. Wait for the metal to cool. Hammer the underside with a rubber mallet. Quote Link to comment Share on other sites More sharing options...
jaime240z Posted August 25, 2005 Share Posted August 25, 2005 I guess I was lucky. Mine came off with a stiff gasket scraper and some elbow grease. Quote Link to comment Share on other sites More sharing options...
74_5.0L_Z Posted August 26, 2005 Share Posted August 26, 2005 We discussed this at length in this thread: http://forums.hybridz.org/showthread.php?t=102881 Quote Link to comment Share on other sites More sharing options...
MTenneZ Posted August 26, 2005 Share Posted August 26, 2005 I used one of the air chisels with a flat blade very carefully. It took off most of the stuff I just need to get in there and remove the small remaining pieces. Quote Link to comment Share on other sites More sharing options...
Montoya Posted August 26, 2005 Share Posted August 26, 2005 Pour dry ice on the floor and spread it out. Wait for the metal to cool. Hammer the underside with a rubber mallet. This is by far the best way to go. I crished the dry Ice up into small pieces and spread it out on the floor. You can hear the rubber cracking and then it is a piece of cake to remove it. Otherwise be prepared for a lot of work. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.