busmn280 Posted December 20, 2005 Share Posted December 20, 2005 I was wondering if I could get some recommendations on upgrading my stock fuel rail. I understand JSK Innovations makes a setup or used to make one. I cant seem to find their website. Also when upgrading to new fuel rail, are there any other changes that need to be done? Thanks! Quote Link to comment Share on other sites More sharing options...
proxlamus© Posted December 20, 2005 Share Posted December 20, 2005 Pallnet is the man... Pallnet will make you barbed or o-ring fuel rails... awsome awsome quality. Quote Link to comment Share on other sites More sharing options...
EZ-E Posted December 20, 2005 Share Posted December 20, 2005 I agree, his products are well tested before leaving him to assure proper working part. I would go with Petes rail, you can email him at pallnet@hotmail.com about his rail. Here is his website http://www.freewebs.com/pallnet/ Quote Link to comment Share on other sites More sharing options...
olie05 Posted December 20, 2005 Share Posted December 20, 2005 yes, I have PAllnet's rail. It is very good quality. You really don't need to do any other modifications, other than maybe replace the little rubber hoses between the rail and injectors. You may have to find another place to mount the FPR, however. -Oliver Quote Link to comment Share on other sites More sharing options...
Cruez Posted December 20, 2005 Share Posted December 20, 2005 I made mine with some fuel rail stock... http://www.cruez.com/gallery/displayimage.php?album=4&pos=2 Quote Link to comment Share on other sites More sharing options...
Here comes trouble Posted December 20, 2005 Share Posted December 20, 2005 JSK fuel rails still show up on e-Bay under auto-truck parts-Datsun-fuel delivery. Pal Net is a member here and deserves our support. Crue Z I bookmarked your website for your innovative modifications. I have the JSK fuel rail with a fuel pressure gauge... The gauge is what I consider a very important item to aid in the repair of these aging Z fuel injection systems which collectively have chosen failure in the last couple years across the entire USA. I heard there was a remaining 76 Z in Maine near the Canada border that still has an operating stock fuel injection system (LOL)...... but the body is totally rusted. Quote Link to comment Share on other sites More sharing options...
olie05 Posted December 20, 2005 Share Posted December 20, 2005 JSK fuel rails still show up on e-Bay under auto-truck parts-Datsun-fuel delivery. Pal Net is a member here and deserves our support. Crue Z[/u'] I bookmarked your website for your innovative modifications. I have the JSK fuel rail with a fuel pressure gauge... The gauge is what I consider a very important item to aid in the repair of these aging Z fuel injection systems which collectively have chosen failure in the last couple years across the entire USA. I heard there was a remaining 76 Z in Maine near the Canada border that still has an operating stock fuel injection system (LOL)...... but the body is totally rusted. mine still works. Quote Link to comment Share on other sites More sharing options...
phil280zxt Posted December 21, 2005 Share Posted December 21, 2005 Hey Trouble, where in Maine is this Z? I'm originally from Northern Maine, 1/4 mile from the Canadian border... Quote Link to comment Share on other sites More sharing options...
Here comes trouble Posted December 21, 2005 Share Posted December 21, 2005 Phil...... rumor has it that your FI was the last working FI without trouble. Olie does not know but his RFI stock unit prior to his ownership was repaired by Ocbaar of Oregon ....LOL fellas a lttle humor here ....why do you consider used carbs for a Z require a bank loan ? Quote Link to comment Share on other sites More sharing options...
Guest nitr0 Posted December 21, 2005 Share Posted December 21, 2005 If pallnet's quality is as good as everyone says it is, then his prices are fantasic and I will definately be considering his products, providing shipping to Australia isnt too high. Quote Link to comment Share on other sites More sharing options...
pallnet Posted December 21, 2005 Share Posted December 21, 2005 Thanks fellas. I try to make what I like and will run on my own cars. I have shipped to Aussie land a few times before. I ship air cause even air shipping takes almost a month. If I ship ground you might have to will it to your children, damn shipping is slow even with modern tech. these days. Shipping to you will be anywhere from $22.00 on up depending on what all you order. This is cause of the weight and how far you live from where the package arrives in your country. I will gladly ship to you. I have 14mm O-ringed versions of all my rails in production and I now have RB25DET rails. Soon I will have RB20DET rails on the market. Like always on my O-ring rails, the bores are tighter then a crabs azz. I will not settle for leaks, this is the way I work. Sorry fellas if you ordered very close to Z-mas. I filled a large amount of orders and all have said that the shipping was a bit slow with the holiday. Please bare with them, the post office is very under staffed in my area due to the damages of Hurricane Katrina. Shipping supplies in and orders out has been a tad slow. If you don't see it on my site or you have an intake you want a custom rail for, just email me. You can order directly from my site with paypal. Thanks pallnet Quote Link to comment Share on other sites More sharing options...
busmn280 Posted December 21, 2005 Author Share Posted December 21, 2005 I am very impressed with your product! I will put one of your rails on my shopping list to go with my 720cc injectors! I have a custom intake so I will have to figure out how to mount that badaboy!!! Thanks, busmn280 Quote Link to comment Share on other sites More sharing options...
pallnet Posted December 22, 2005 Share Posted December 22, 2005 busmn280 If you're in the US and you want to ship me your intake. I will make it to fit. You can send me pics of your intake and it may be one I can fab without the intake. Quote Link to comment Share on other sites More sharing options...
Nismo280zEd Posted December 24, 2005 Share Posted December 24, 2005 Fellas that's why man created Standalone systems. And my stock EFI ran great until it caught fire about 3 years back now. (no it wasn't electrical fire either) -Ed Quote Link to comment Share on other sites More sharing options...
Turbo280Z Posted December 31, 2005 Share Posted December 31, 2005 www.racetep.com also has fuel rails and many other parts for Z cars Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.