Jump to content
HybridZ

Newbe: start of 5.0L swap with pics


s3079893

Recommended Posts

Hi all

I have just started my swap, at the moment the plan is to swap a 91 5.0L windsor, with AFR heads forged pistons with a straight lpg setup into my 280zx. So far i have stripped the block (needs bore and grind) and taken out the old motor (I want to get as much done during the summer vac as possible). I am still trying to decide on what manual tranny to get for it (i'm aiming at 350+ hp) any suggestions?

 

i would appretiate any tips you might have for me and here are some pics i have tacken

 

Motor as i bought it

 

the car

 

the block

engine coming out

Link to comment
Share on other sites

Hello s3079893. I'm just about in the same spot as you. I just recieved my '88 302 HO back from the machinist last week, and have started painting and putting it back together. I too am shooting for around 350 HP when everything is said and done, i plan to use the stock T-5 also. I've also heard that the T-5 should handle around 400 Hp.

Here's my gallery of what I've done so far.

http://206.169.90.30/mike/view_album.php?set_albumName=Z-Project

Good luck with the project.

Mike

Link to comment
Share on other sites

  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...