big-phil Posted January 1, 2006 Share Posted January 1, 2006 I found a Z31 84-89 MAF, chopper wheel from a non turbo car. Can I use these in the 280zxt swap. I will have the z31 turbo ECU, but as for the chopper wheel and mass air flow sensor, do they have to be off a turbo z31? Quote Link to comment Share on other sites More sharing options...
EZ-E Posted January 1, 2006 Share Posted January 1, 2006 There is a complete FAQ in the turbo section about this swap with several questions and answers, Im sure if you search there you will find the answer your looking for. Quote Link to comment Share on other sites More sharing options...
big-phil Posted January 1, 2006 Author Share Posted January 1, 2006 I looked in there but did'nt see anything about the z31 chopper wheel having to be from a turbo? Quote Link to comment Share on other sites More sharing options...
EZ-E Posted January 1, 2006 Share Posted January 1, 2006 The chopper wheel itself is the same wether from a turbo or N/A motor. Quote Link to comment Share on other sites More sharing options...
big-phil Posted January 1, 2006 Author Share Posted January 1, 2006 thanks Quote Link to comment Share on other sites More sharing options...
jeffp Posted January 2, 2006 Share Posted January 2, 2006 Any Z31, Maxima, wheel will work. The only difference is that one of the injector triggers is wider, to tell the ECU it is @ TDC. Make sure you dont get it flipped upside down. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.