gnosez Posted January 7, 2006 Share Posted January 7, 2006 We have gotten a set of 300ZX vented rotors and calipers as a donation for our 240 club race car but the bolts needed to mount the rotors to the hubs are missing. Does anyone know where we can get them? I believe they are 10mm X 1.00 x 60 mm ( fine thread ) with a shoulder to center the rotors, in grade 8 or higher. I am not positive about the length. In fact the only thing I'm positive about is that they're missing. Thanks in advance...... Quote Link to comment Share on other sites More sharing options...
JMortensen Posted January 7, 2006 Share Posted January 7, 2006 I've got a box of bolts that I got from http://www.mcmaster.com. They are 10 x 1.25 x 40mm. I have 10 left. They are allen head bolts, 12.9 metric, with a ridiculous tensile strength of 129,000 psi or something like that. I seem to remember getting the spec on the bolts from Mark Belrose who races a CP car with the vented 300ZX setup. If you can verify that they're the right length I'll happily donate them to your cause. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.