frank280zx Posted April 6, 2006 Share Posted April 6, 2006 For my 2+2 i dropped in a turbo engine as the HC combo spun a bearing and i want to go stroker on that ( but than needs cash so time!) So nothing fancy on the turbo, but MsS will be installed, and probably a worked e88 head to raise the CR a bit.. I did not have time for a IC mock up as the car needs to be track ready in two weeks. so i decided to go this route.. agian the car does not need to be a flying machine, and i dont want to put all my time in this, as i have my coupe project I need to grind of the stock jpipes connection as i plasma cut it off (diffrent intake (euro zx intake NT with a 53mm TB) it will also have 3" DP ill shoot a pic of anyway ill be hishing along I love welding !!! Quote Link to comment Share on other sites More sharing options...
big-phil Posted April 8, 2006 Share Posted April 8, 2006 Before I put my intercooler in I ran the boost up as much as 10 psi then got some detonation, so don't go any higher than that with only your turbo injectors. I also welded a BOV onto some 2 1/2 inch pipe. Welding is fun! Quote Link to comment Share on other sites More sharing options...
frank280zx Posted April 8, 2006 Author Share Posted April 8, 2006 not planning on more then ten for this set up.. i have my other car to go in 'extremes' ( saying that is knowing extreme is relative here ) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.