Jump to content
HybridZ

is this B.S?? Diesel "Magnetic Cyclonification"


260ZRED

Recommended Posts

Anyone watch Mythbusters last night? They tested the magnets, a 300 mpg carburetor, and an electrolysis thing that produced hydrogen which was supposed to run the car. None worked of course, but it was pretty entertaining when they took a tank of compressed hydrogen and got one of the cars to run on it just by blowing a little hydrogen directly into the carb. Thought that was pretty cool!

Link to comment
Share on other sites

Anyone watch Mythbusters last night? They tested the magnets, a 300 mpg carburetor, and an electrolysis thing that produced hydrogen which was supposed to run the car. None worked of course, but it was pretty entertaining when they took a tank of compressed hydrogen and got one of the cars to run on it just by blowing a little hydrogen directly into the carb. Thought that was pretty cool!

 

 

Your car should run pretty clean on hydrogen, although in order to get the same range as gasoline, your gas tank would have to be 2.75X bigger and store it either at -253C or at an extreamly high pressure no doubt 20ga sheetmetal wouldn't be enough, so you'll add weight there.

 

http://www.clean-air.org/Hydrogen%20Cobra%20Story/Hydrogen%20Cobra.htm

Link to comment
Share on other sites

jmortensen

 

if you think metalic dust in the gas works you need to try CARBORUNDUM paste valve grinding compound added to your OIL, it almost instantly increases the bearing clearances, increases oil flow,lowers oil flow resistance thru the engine, increases valve guide clearances. loosens rockers, pollishes lifter bores and generally increases oil flow everywhere

80036_3X.jpg

why have all that power robbing friction when smply adding a single $4 tube to your oil will remove a good deal of the contact area between the cylinder walls and rings

Link to comment
Share on other sites

Your car should run pretty clean on hydrogen' date=' although in order to get the same range as gasoline, your gas tank would have to be 2.75X bigger and store it either at -253C or at an extreamly high pressure no doubt 20ga sheetmetal wouldn't be enough, so you'll add weight there.

 

http://www.clean-air.org/Hydrogen%20Cobra%20Story/Hydrogen%20Cobra.htm

You should check this. Read on the amount of hydrogen they can store using there method. Hydrides. http://www.switch2hydrogen.com/h2.htm

Link to comment
Share on other sites

You should check this. Read on the amount of hydrogen they can store using there method. Hydrides. http://www.switch2hydrogen.com/h2.htm

 

There is something extremely fishy about that site. They list all these products and make all these claims about what they can do, but none of their products are actually available yet, all the prices are approximate, they say don't call them because all of their info is on the web site and yet their web site is basically nothing but a top level sales brochure. Plus they cry "the government" is trying to shut them down.

 

Plus their claim that there solar generator will make hydrogen "at near zero cost" is totally moronic. They don't have a price on their hydrogen generator, but they do sell 80 watt solar panels (at $425 each) and say it takes a minimum of 5 to run the hydrogen generator. With only 400 watts of output and figure a 70% hydrogen conversion efficiency, that $2125 solar panel + hydrogen generator might kick out enough hydroden to equal about a gallon of gas a week. And that is only if the sun shines all week.

 

This link

 

http://www.aip.org/tip/INPHFA/vol-10/iss-1/p20.html

 

talks about hydrides and says a tank large enough to hold 5 kg of hydrogen (maybe 10 gallons of gas) weights 360 kg. Did they really add a 1500+ pound tank to that vette to get their 450 mile range?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...