chopstic Posted August 5, 2006 Share Posted August 5, 2006 im trying to replace the bushing on the mustache bar, but i cant seem to get the mustache bar loose. Do i need to totally disconnect the diff to get it to lower enough to remove the mustache bar? Quote Link to comment Share on other sites More sharing options...
COZY Z COLE Posted August 5, 2006 Share Posted August 5, 2006 Check this link out... http://www.atlanticz.ca/zclub/techtips/moustache/index.html LARRY Quote Link to comment Share on other sites More sharing options...
dr_hunt Posted August 5, 2006 Share Posted August 5, 2006 Now is that helping out or what!!!! Quote Link to comment Share on other sites More sharing options...
chopstic Posted August 5, 2006 Author Share Posted August 5, 2006 my only problem is even after i unbolt the mustache bar the differential does not want to lower at all, which makes it extremely difficult to get the mustache bar removed.... Does anyone else have this problem or am i just a retard Quote Link to comment Share on other sites More sharing options...
RUSSJZ-ZED Posted August 5, 2006 Share Posted August 5, 2006 You probably have the jack in the wrong place, try and position it so that when you let it down. the diff does not "lean" and lock on to the 2 vertical bolts,If you have the jack in a central balanced position, Mo bar should come down, unhindered with it's own weight, slight angle, it will lock onto the 2 vertical bolts. I did this today, had same problem ,untill I figured getting the jack to a centre of weight position,Then it fell out, a bit faster than I had planned. Quote Link to comment Share on other sites More sharing options...
iaconsultants Posted August 6, 2006 Share Posted August 6, 2006 Excellent job Cozy Z Cole. Quote Link to comment Share on other sites More sharing options...
73ZCAR Posted August 11, 2006 Share Posted August 11, 2006 Great write up there. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.