strangethursday Posted April 8, 2007 Share Posted April 8, 2007 ok just snagged the crane hi6 out of a legend i used to drive for my z but, i'd like to see where people have mounted their ignition boxes. i might just wait til switch to a relocated odyssey battery & mount it there but, i'm still curious. i'm not seeing alot of other options Quote Link to comment Share on other sites More sharing options...
Pop N Wood Posted April 8, 2007 Share Posted April 8, 2007 Pull the cowl panel off and mount it in there. Nice big empty space under the cowl. Quote Link to comment Share on other sites More sharing options...
strangethursday Posted April 8, 2007 Author Share Posted April 8, 2007 Pull the cowl panel off and mount it in there. Nice big empty space under the cowl. Any issues with moisture there? Quote Link to comment Share on other sites More sharing options...
SHADY280 Posted April 8, 2007 Share Posted April 8, 2007 there ya go, its mounted on a sheet metal stand, then the coil was mounted "tits up" cause your supposed to mount oil filled coils that way, but who reads instructions? Quote Link to comment Share on other sites More sharing options...
Pop N Wood Posted April 9, 2007 Share Posted April 9, 2007 Any issues with moisture there? The boxes are sealed. As long as it is mounted right side up using rubber isloators it will be fine. It might get rain on it but no road splash like under the hood. I had a Jacobs ignition box mounted behind the grill just to the side of the radiator for over 15 years. Never had a problem. Must have been continually wet when driving in the rain. Quote Link to comment Share on other sites More sharing options...
v80z Posted April 9, 2007 Share Posted April 9, 2007 Mine is on the dash. NASCAR style. AHAHAHAHAHH Quote Link to comment Share on other sites More sharing options...
Dtsnlvrs Posted April 9, 2007 Share Posted April 9, 2007 Mine is mounted on the pasenger footwell Quote Link to comment Share on other sites More sharing options...
SHADY280 Posted April 9, 2007 Share Posted April 9, 2007 may want to replace that spin nut connector on your msd dtsnlvrs. the better the connection, the better the signal. i noticed problems on mine, even when i had used the stock spade connectors. its all soldered now. not to pick at your setup. Quote Link to comment Share on other sites More sharing options...
Dtsnlvrs Posted April 9, 2007 Share Posted April 9, 2007 may want to replace that spin nut connector on your msd dtsnlvrs. the better the connection, the better the signal. i noticed problems on mine, even when i had used the stock spade connectors. its all soldered now. not to pick at your setup. Yeah I know I should..That is the constant hot feed BTW, cannont remember why I did it that way. Quote Link to comment Share on other sites More sharing options...
2003z Posted April 10, 2007 Share Posted April 10, 2007 on my last Z, I put the HI6 where the window washer fluid bottle went. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.