Accurate Injection Posted July 20, 2007 Share Posted July 20, 2007 Hey Bill: Well we have Access to Blue, but Sorry our Competition is Blue so we try to steer away from that color! Also we have to do Bulk jobs to keep the cost down, or we are back up there at $3600 like everyone else! If you wanted the parts can be "Lightly Acid etched" and painted any color you like, and it retains the Protective Anodized coating underneth! Kevin Quote Link to comment Share on other sites More sharing options...
Administrators BRAAP Posted July 20, 2007 Administrators Share Posted July 20, 2007 Kevin, Your choice of colors, I’m beginning to like you more and more.. BillZ260, Whenever there is a choice between Red or Blue in regards to car parts, remember "Red" is always faster than "Blue", just ask Ron Tyler… Quote Link to comment Share on other sites More sharing options...
Accurate Injection Posted July 20, 2007 Share Posted July 20, 2007 Hahahaha! Careful with that Shovel! Kevin Quote Link to comment Share on other sites More sharing options...
BillZ260 Posted July 20, 2007 Share Posted July 20, 2007 Well, Red would go w/ the HEI.... Quote Link to comment Share on other sites More sharing options...
Bartman Posted July 20, 2007 Share Posted July 20, 2007 Man, that really is sexxxy! I wish I wouldn't have opened this thread, now I have a severe case of intake envy. Do you have any pic's of a working system installed complete with fuel rail, air filters, etc? Quote Link to comment Share on other sites More sharing options...
Guest pat_ernzen Posted July 21, 2007 Share Posted July 21, 2007 Awesome. Not many parts look cooler than ITBs. Quote Link to comment Share on other sites More sharing options...
Accurate Injection Posted July 21, 2007 Share Posted July 21, 2007 Hey Man! Sorry not yet! Partner is still building his Small Block and that's those are going on! We are hoping like hell that with Picos the Rails will go under the ITB's and Clear the Valve covers! If so it will be lotssssssssssss cleaner! I could mach-up the Rails Standard Height, if you wanted to see it? With Pico injectors the Rail sits right on top of the ITB's for a very compact look! Kevin Quote Link to comment Share on other sites More sharing options...
MY77Z Posted August 14, 2007 Share Posted August 14, 2007 Hi Kevin, i have a question about the ford ITB setup, do i need a special wiring harness?? or the stock one would work? never had ITBs before so i have no idea about wiring them. if the stock harness works, what would i do with the plug that goes to the MAF sensor?? would you explain it please. Quote Link to comment Share on other sites More sharing options...
Accurate Injection Posted August 14, 2007 Share Posted August 14, 2007 Hey Ali: You will need to switch to a MAP sensor system or plumb the ITB thru a Plenum! The Latter is a contradiction in terms to a set of ITB's! If I had more informatin about the Electronics yor running on your set-up I could help further! If you have 8 injector plugs now and they are Standard Bosch then they will fit in our ITB's! Kevin Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.