S30TRBO
-
Content Count
758 -
Donations
0.00 USD -
Joined
-
Last visited
-
Days Won
1 -
Feedback
0%
-
RCS custom intake plenum is complete. Adding custom charge pipe and filter!
-
So the Autopower rollbar didn't fit with my 350Z seats and my 6'2" frame so a custom bar was in order. It was boxed into the rocker panel and tied into the wheel well housing.
-
It's been a while, we found some unexpected rust under the cowl panel so this absolutely had to be addressed. Luckily I had a front firewall clip so Jamie could use some bits and match everything back up.
-
Boom!!
-
Appreciate it, coming to an end finally!! Thanks me too!
-
Email sent Mario
-
Still needed.
-
PM sent Jamal
-
Wondering if someone has a rear set only, I don't need the front. Thanks,
-
Rear 280ZXT (S130) lower cross member installed with machined Z31 urethane bushings: Rear shocks reassembled: (Bilstein with Quickor Springs) Rear stub axles together: Mock up of rear 280ZXT brakes:
-
More progress wiring done: Ford Taurus fan wouldn't fit time for something else: After some custom brackets were made: The mock up of what's next:
-
Wanted 81-84 Maxima R180 Differential w/ or w/ out CV axles from an automatic (3.70 ratio). If you know or have a lead on one please let me know. Needed for the 810 project. Thanks,
-
bump
-
Bump
-
Wanted 81-84 Maxima R180 Differential w/ or w/ out CV axles from an automatic (3.70 ratio). If you know or have a lead on one please let me know. Needed for the 810 project in Maryland.
