TheNick Posted November 23, 2008 Share Posted November 23, 2008 I just went to install mine and its not even close to fitting. Where the strap mounted before - the bolt spacing is 1.25" - not 2.5" The holes are 3.75" away from hitting a bracket for the fuel lines. So um yeah, I guess I'm going to have to make some modifications to the mount... Quote Link to comment Share on other sites More sharing options...
TrumpetRhapsody Posted November 23, 2008 Share Posted November 23, 2008 You didn't list anything about the car you're putting this in... Quote Link to comment Share on other sites More sharing options...
TheNick Posted November 23, 2008 Share Posted November 23, 2008 70 240z - I have pictures - will post them in an hour or so once I finish getting the R200 close enough to take measurements for the front mount Quote Link to comment Share on other sites More sharing options...
TheNick Posted November 23, 2008 Share Posted November 23, 2008 The center of the ES mount is 1-5/8" from the closest hole - which is the one on the left in the pictures (looking towards the front of the car in the pics) Quote Link to comment Share on other sites More sharing options...
Roostmonkey Posted November 23, 2008 Share Posted November 23, 2008 I also have a series 1 chassis and its on the spit right now so I'll make note of the bolt pattern and when I make more brkt's, I'll add this hole ( each mount will have three holes to choose from) Must be having a flashback because i seem to remember making some with the addl hole. Sorry you have to drill some more holes.It should be only two holes. Quote Link to comment Share on other sites More sharing options...
TheNick Posted November 23, 2008 Share Posted November 23, 2008 Nah its not your fault - I didn't buy one from you I made it myself Quote Link to comment Share on other sites More sharing options...
S30TRBO Posted November 30, 2008 Author Share Posted November 30, 2008 If it helps I had to trim the lip off to get my R/T Mount to fit without taking the diff out. See attached. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.