ezzzzzzz Posted May 25, 2008 Share Posted May 25, 2008 I picked up these hubs sometime back. They are suppose to be off a Z31. The bolt pattern is 5x4.25"(?). Everything I read says the Z31 5 bolt pattern is 4.5". Any insight would be helpful. Quote Link to comment Share on other sites More sharing options...
S30TRBO Posted May 26, 2008 Share Posted May 26, 2008 That's right 5x4.5" or 114.3mm. Quote Link to comment Share on other sites More sharing options...
blueovalz Posted May 26, 2008 Share Posted May 26, 2008 What you have there IS a 4.5" pattern IF measured directly across the center of the hub. Measuring across studs is an inaccurate way to measure a 5 lug pattern, and is different than measuring across a 4 lug pattern (the 4 lug being directly measurable and accurate). Quote Link to comment Share on other sites More sharing options...
rudypoochris Posted May 26, 2008 Share Posted May 26, 2008 As pointed out above... Quote Link to comment Share on other sites More sharing options...
ezzzzzzz Posted May 27, 2008 Author Share Posted May 27, 2008 Thanks fellas. I just brain-farted there. It should have been obvious to me but my head was going in too many directions at that time. Quote Link to comment Share on other sites More sharing options...
blueovalz Posted May 28, 2008 Share Posted May 28, 2008 I was getting concerned and felt that perhaps the HybridZ community come by your place and see if you were ok. That was so uncharacteristic of you, but I've done the same thing, and then sit back and wonder, why....why...why. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.