TexasZX Posted July 7, 2008 Share Posted July 7, 2008 Hi all, kinda sucks that my first post is about how to fix my car, I bought it 2 days ago and yesterday the clutch went out. I have a few questions, will the Arizonazcar clutch fit my car, and what other clutches will fit? I have heard the 300zx clutch will fit but I haven't found any hard evidence on this. Thanks in advance... Quote Link to comment Share on other sites More sharing options...
Calgary280ZT Posted July 7, 2008 Share Posted July 7, 2008 I bought a Valejo clutch and PP of fleabay for $65, it was 240mm and it works great. Quote Link to comment Share on other sites More sharing options...
TexasZX Posted July 7, 2008 Author Share Posted July 7, 2008 Just found the exact same thing, except the price is different I think I might snatch it up... Quote Link to comment Share on other sites More sharing options...
jeffer949 Posted July 7, 2008 Share Posted July 7, 2008 Will you define the clutch going out? cause it might not be your actual clutch/pressure plate assembly Quote Link to comment Share on other sites More sharing options...
TexasZX Posted July 7, 2008 Author Share Posted July 7, 2008 Car wont go into gear when on, press the clutch pedal in and it doesn't go into gear, the clutch already felt like it was giving out and it was slipping badly right before it did. It will go into gear when the car is off though. Also the clutch flywheel set I found on ebay says for 2+2 only will that make a difference if a have a 2 seater or will I need to find a 2 seater version? That doesn't seem like it would make a difference but I'm new to these cars... Quote Link to comment Share on other sites More sharing options...
mikeatrpi Posted July 8, 2008 Share Posted July 8, 2008 You should verify that the clutch master and slave cylinders are "doing their thing" first. Check the level in the MC, and crawl under the car and watch the slave move the fork when someone pushes the pedal. Quote Link to comment Share on other sites More sharing options...
phil280zxt Posted July 9, 2008 Share Posted July 9, 2008 The turbo 280zxt and the NA 2+2's use a 240mm flywheel and clutch setup. The NA 2 seater uses a 225mm flywheel. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.