Best BOV to hy35w input

[jeffer949]

few months but Im running megasquirt. And no MAF or AFM just a MAP

[rvandivort]

That`s what I`m going to be doing!

[WizardBlack]

You will probably need to fab your own intake pipe to connect the three items:

 

Air filter, BOV outlet and Turbo Inlet.

 

Here is one for a DSM. You can see the mass air flow meter at the left, the bov pipe and then the compressor hookup on the right:

 

http://www.slowboyracing.com/estore/product.php?productid=2831

 

Here is probably one of the best OEM BOV's other than exotics:

http://www.dsmparts.com/customer/product.php?productid=366&cat=7&page=1

Just have a two bolt flange welded to your intercooler piping that matches it. You can also buy them. It's a 1G DSM BOV. Any BOV will make some noise to a degree, but this one (and the GReddy Type-R and old style Type-S) are not intentionally designed to be noisy.

[rvandivort]

Thanks!

[blairjj]

Guys,

 

I just finished the following mod to my 1g DSM BOV:

 

http://www.thedodgegarage.com/turbo_bov_mod.html

 

Might want to consider if you end up using one.

 

Jay

[rvandivort]

Thanks blairjj, Have a "mildly crushed" DSM from EBAY on the way..good for 20psi. Thanks, Roger

[rvandivort]

Have Found that the BOV adapters listed on Ebay as "universal" are not! I received a DSM,and it was a delta pattern. I ended up using the leftover 2.5 pipe from the intercooler kit.I made it with a plastic hammer, jigsaw, and drill....from the gasket I was given. Just used a leftover pipe.( the intercooler piping folks give You a lot!)

[rvandivort]

I should say "diamond' rather than delta.

[rvandivort]

So ,I will go to the internal part of the SPECTER air filter, which happens to be an almost 1 1/4" (or close ) straight shot to the turbine. Now, I need to find a 1 1/4" tube!