mikeatrpi Posted August 22, 2008 Share Posted August 22, 2008 I did exactly what you're trying to do, about 4 years ago. I was using rustoleum primer on my car as I completed each section. When the car was done in rustoleum primer, I mixed up PPG epoxy primer and sprayed a coat. It immediately lifted the finish... it wrinkled up and was terrible. I had to strip it all back again. That's when I noticed I had to redo some bondo work, as the rustoleum let some water in. How you proceed depends on your goals for the car. If you want it to be a nice, don't mess with it again, finish - do it right. Epoxy, bondo, epoxy, primer, paint. If you want a good enough for now or the next few years, maybe give the roller-rustoleum paint job a try. Quote Link to comment Share on other sites More sharing options...
bigblock96 Posted August 22, 2008 Share Posted August 22, 2008 and best after going down to bare metal spray staying with the same company of products to keep from lifting cracking and such -just my .02 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.