Z24O Posted September 15, 2008 Author Share Posted September 15, 2008 Last orders taken tonight as i will be organising them so far here's the list (including those guys who said they wanted one but wouldn't have the money until later....please don't back out) Roostmonkey 2 x -8 fittings WG383 2 plus one crank collar Racinjitter 1 DatsunDave 1 amorfin 2 Careless 1 Jonnyringo 1 Quote Link to comment Share on other sites More sharing options...
Careless Posted September 16, 2008 Share Posted September 16, 2008 I will be paypal'n you the moola tonight or tomorrow night for sheezy!! Quote Link to comment Share on other sites More sharing options...
badgti Posted September 16, 2008 Share Posted September 16, 2008 guys initially i will get 10 oil drain fittings machined up in either -8 or -10 so let me know which most of you would prefer and i will do that batchas i said there is no appreciable difference in oil flow at revs through the fitting/hose,there is a little more room when fitting the -8 as it is slightly smaller, however both sizes fit ok for those that inquired about the crank collars,they are designed for the RB26(r32),RB25 and RB30 cranks that have the narrow snout oil pump drive which are renowned for causing oil pump failure if you are using the RB26 pump they come with machining instructions/tolerances for a press fit and countersunk grub screws and are easily fitted to the crank by any competent machine shop they are US$100+post (much cheaper than JUN) and will be the best $100 you will ever spend on an RB.....much cheaper than a new motor:? don't forget your postal addresses paypal probably the easiest method of payment i'd like 2 sets of your -8 drain fittings and also the crank collars u mentioned for thr rb26.pm me details on your bank and i can wire tansfer the payment to you ASAP.by the way can u ship em to me in Malaysia?thanks Quote Link to comment Share on other sites More sharing options...
Z24O Posted September 18, 2008 Author Share Posted September 18, 2008 Guys the fittings should be here by monday Those guys that have paid me by then i will post off their parts Tuesday(make sure i have your full address otherwise i won't be able to) On Wed I am away for 3-4 weeks with work so won't be able to send the remaining fittings until i get back....this gives those guys saving up their pennies plenty of time to stuff the piggy bank:wink: Quote Link to comment Share on other sites More sharing options...
datsun dave Posted September 19, 2008 Share Posted September 19, 2008 Paypal payment sent. Quote Link to comment Share on other sites More sharing options...
Z24O Posted September 20, 2008 Author Share Posted September 20, 2008 Update on orders Roostmonkey 2 x -8 fittings WG383 2 plus one crank collar-PAID Racinjitter 1 DatsunDave 1-PENDING amorfin 2 Careless 1-PAID Jonnyringo 1 thanks to those guys,should have the fittings in the mail to you early next week Quote Link to comment Share on other sites More sharing options...
Z24O Posted September 23, 2008 Author Share Posted September 23, 2008 Guys I must apologise,there has been an over-run on another machine job and the parts won't be ready until later in the week when i am away. I have prepared all the postal arrangements and will get my wife to post the parts off to the 4 of you when she returns home in about 2 weeks(i will be away for a further 3 weeks after that) Once again apologies to amorfin,datsun dave,wg383 and careless btw here is a shot of the crank collar for those that asked Quote Link to comment Share on other sites More sharing options...
TexasZX Posted October 14, 2008 Share Posted October 14, 2008 Excuse my ignorance, but I've been looking at RB26 swaps lately. What is the crank collar used for exactly? Also, this oil drain mod looks like a GREAT alternative to the desynz motorsports head drain kit. Quote Link to comment Share on other sites More sharing options...
Careless Posted October 15, 2008 Share Posted October 15, 2008 The flat portion on the outside diameter of the crank snout that mates with the flat portion on the inside diameter of the oil pump (which locks their movement together) is smaller on the R32's, while all the oil pumps have the same size flat portion whether for R32 33 or 34. this makes the oil pump like using an 14mm wrench (pump) on a 13mm bolt (crank snout). vibrates itself to pieces. Quote Link to comment Share on other sites More sharing options...
Z24O Posted October 17, 2008 Author Share Posted October 17, 2008 Guys I am still away travelling until the end of the month,my wife kindly posted off the above orders for me Tuesday this week,let me know when they arrive cheers Paul Quote Link to comment Share on other sites More sharing options...
Zardilla Posted October 30, 2008 Share Posted October 30, 2008 Paul - are any of the head drain fittings still available? If so I would like to buy one. Thanks Matt Quote Link to comment Share on other sites More sharing options...
Careless Posted October 31, 2008 Share Posted October 31, 2008 I believe I have received my oil head drain. It's at the parent's place with the rest of the RB stuff. Thanks Paul! Quote Link to comment Share on other sites More sharing options...
datsun dave Posted November 4, 2008 Share Posted November 4, 2008 My oil head drain has arrived in the UK many thanks. Dave Quote Link to comment Share on other sites More sharing options...
S15 200sx owner Posted November 8, 2008 Share Posted November 8, 2008 Do the oil drain plugs fit the R33 RB25 head, is it the same size as the RB26 plug?? If so i will have one please, as well as a RB30 crank collar thanks. Please advise total paypal amount including Shipping to New Zealand. Cheers Clint. Quote Link to comment Share on other sites More sharing options...
blu808 Posted November 14, 2008 Share Posted November 14, 2008 Im in for the r32gtr crank collar. Can i still purchase one? Quote Link to comment Share on other sites More sharing options...
ZT-R Posted April 5, 2009 Share Posted April 5, 2009 checking on availabilty Quote Link to comment Share on other sites More sharing options...
noodl35 Posted April 6, 2009 Share Posted April 6, 2009 I know this thread is old but i'd like to know on availability as well. Thanks idjnoodz@yahoo.com David Quote Link to comment Share on other sites More sharing options...
Z24O Posted April 7, 2009 Author Share Posted April 7, 2009 still got a few left guys,first in best dressed Quote Link to comment Share on other sites More sharing options...
noodl35 Posted April 7, 2009 Share Posted April 7, 2009 still got a few left guys,first in best dressed pm'ed you Quote Link to comment Share on other sites More sharing options...
Midnight-280Z Posted May 25, 2009 Share Posted May 25, 2009 This is a long shot here but thought I give it a try. If you still have some available, I'm intersted, PMed you. Thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.