Mike Rowe Posted October 15, 2008 Share Posted October 15, 2008 I have a friend doing the RB25 swap into his Z here in Perth WA. I am in the middle of the RB26 swap and purchased my sump and pickup through Nissan parts a couple of years ago, however they now say they are unavailable even out of Japan. Does anyone have a source for these any where? I 11110 - Oil sump 15050 - Oil pickup Quote Link to comment Share on other sites More sharing options...
mtnickel Posted October 16, 2008 Share Posted October 16, 2008 Nismoparts.com 161, and 28 for the pan and pickup Respectively. I think i'm going to have a go at just cutting the entire bottom off (1" from flange) and welding it back up...converting front to rear also will wing the pan, put in a windage tray, and confirm the baffling is still decent. The winging will help anyways. Mark Quote Link to comment Share on other sites More sharing options...
mtnickel Posted October 16, 2008 Share Posted October 16, 2008 almost forgot... http://www.nismoparts.com/catalog/?section=934 link Quote Link to comment Share on other sites More sharing options...
Mike Rowe Posted October 16, 2008 Author Share Posted October 16, 2008 thanks Mark, appreciate it Quote Link to comment Share on other sites More sharing options...
fast-datsun Posted December 14, 2008 Share Posted December 14, 2008 We are llooking into getting some made in a 8 qt sump. waiting on tooling cost....May hand fab up some if enought intrest.... Quote Link to comment Share on other sites More sharing options...
amorfin Posted December 14, 2008 Share Posted December 14, 2008 We are llooking into getting some made in a 8 qt sump. waiting on tooling cost....May hand fab up some if enought intrest.... I would definately get a sump/pickup for RB26 into S30. If these plans get a little more serious, can you let me know? Thanks, Angel Quote Link to comment Share on other sites More sharing options...
rayaapp2 Posted December 15, 2008 Share Posted December 15, 2008 Nismo of Seattle and Courtesy of Texas both out of stock. Nismo says they are checking with a supplier in Japan, but currently the pans are no longer being produced by Nissan. They have a waiting list, but no promises on a availability. Erics Performance on eba has 1 pan and sump left... They charge ALOT more than Nismo parts. Ray Quote Link to comment Share on other sites More sharing options...
z-ya Posted December 15, 2008 Share Posted December 15, 2008 I just got one from Nismoparts, he may have more. The pickup is on back order, so I took the matter into my own hands: I thought of cutting the pan, rotating it and welding it back, but the angle is reversed, so the engine could not sit at the correct angle. I may know where a pan is. It has had the windage tray cut up a bit, but it is usable. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.