1 fast z Posted December 30, 2008 Share Posted December 30, 2008 In the warmup wizard, on the stim, or in the car when I set say for example at 40 degrees to be 150% of the fuel, the little bar in MT 029y4 that states warmup percent doesnt change. The duty cycle or Pulse Width does not change either. Is there a setting I am missing or? It is cold and it doesnt wanna run when cold. Quote Link to comment Share on other sites More sharing options...
big-phil Posted December 31, 2008 Share Posted December 31, 2008 I think your setting of 150% is telling MS 50%????? I remember in the decel setting 100% was the base line, or zero setting. Saying this, you should see a 50% change though? Not sure why your not. Quote Link to comment Share on other sites More sharing options...
cygnusx1 Posted December 31, 2008 Share Posted December 31, 2008 Got any datalogs/msq's you can post along with the details of your setup/firmware/hardware? Im sure it must be a setting or condition elsewhere negating the warmup enrichments. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.