jhm Posted February 21, 2009 Share Posted February 21, 2009 Great website, folks! It's provided a wealth of data on a variety of topics, but I haven't been able to find a definitive answer to this particular question. I understand that, in general, it's recommended to use the Hooker 2147 long-tube headers with a Scarab mount; but I'd really prefer to go with block huggers or shorties if possible. If anyone's using them with their Scarab mount, pls let me know what header you're using (manufacturer and model). Pictures would be greatly appreciated as well, so that I could compare with my particular setup. I've attached a couple pix of my current setup w/ iron manifolds -- obviously, I need to be careful with clearance between the header, engine mounts, and steering shaft. Thx in advance to anyone that can help! Quote Link to comment Share on other sites More sharing options...
ZWOLF Posted February 21, 2009 Share Posted February 21, 2009 When I did the restoration I bought a new set just because I wanted the fresh look. I still have the old set on a shelf in the garage. Sorry I don't know what brand they are (or were). But they worked fine and no clearance issues. If you have an interest in them let me know and I'll take some pictures. Rog Quote Link to comment Share on other sites More sharing options...
Scarab 155 Posted February 22, 2009 Share Posted February 22, 2009 I am currently using Sanderson Block Hugger headers on my Scarab. They clear just fine. On the drivers side you have to line up the flanges to avoid hitting the frame but they'll fit OK and do not interfere with anything. I'm not sure you can't use any block hugger header... The only reason I'm using the Sanderson's is that they clear the angle plug heads on my Scarab. You have straight plug heads that can use "normal" block hugger headers. The outer tubes on the Sanderson's are lapped over the inner tubes--- other "shorty" and block hugger headers are the opposite. BTW, I have an original set of Scarab (Hooker) headers that will be going on during the next resto. Quote Link to comment Share on other sites More sharing options...
Zfan1 Posted February 26, 2009 Share Posted February 26, 2009 I am using Hooker Super Comp long tube headers on my Scarab type Z. Quote Link to comment Share on other sites More sharing options...
drmiller100 Posted February 26, 2009 Share Posted February 26, 2009 i'm pretty sure block hugger headers won't fit in a scarab. it seems like i read it in the JTR book, but can't find my copy at the moment..... Quote Link to comment Share on other sites More sharing options...
Scarab 155 Posted February 26, 2009 Share Posted February 26, 2009 I own a factory Scarab (VIN# 155) not a kit but one built and sold as a new car by Scarab. I currently have Sanderson Block hugger headers on the car -- They fit -- Quote Link to comment Share on other sites More sharing options...
drmiller100 Posted February 26, 2009 Share Posted February 26, 2009 sorry, I don't know how I missed your earlier post. My bad - I thought the guy was till waiting for an answer. Quote Link to comment Share on other sites More sharing options...
zeeboost Posted February 26, 2009 Share Posted February 26, 2009 I just parted out a 280z that had a Scarab v8 kit installed, along with long tubes. I still have the long tubes for sale, if you're interested. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.