boosted280 Posted April 11, 2009 Share Posted April 11, 2009 Is it necessary to put the resistors on the wiring? I have researched and came up with nothing. Maybe I just suck at searching. But thanks for any help. Quote Link to comment Share on other sites More sharing options...
MONGO510 Posted April 11, 2009 Share Posted April 11, 2009 What resisters? Quote Link to comment Share on other sites More sharing options...
boosted280 Posted April 11, 2009 Author Share Posted April 11, 2009 On the wiring diagram it shows some resistors. Quote Link to comment Share on other sites More sharing options...
softopz Posted April 11, 2009 Share Posted April 11, 2009 for which diagram there are resistors that could be used for ms1 for the injectors but on ms2 its not necassary this is for the low impedance injectors. There are also resistors being used for tach inputs and what not Quote Link to comment Share on other sites More sharing options...
boosted280 Posted April 12, 2009 Author Share Posted April 12, 2009 This one http://forums.hybridz.org/showthread.php?t=102244 And what wires do i need to use. I know not all of them. But i cant make out the letterin on the wires. lol. So if someone could tell me the colors needed it would be greatly appreciated. Quote Link to comment Share on other sites More sharing options...
Matt Cramer Posted April 13, 2009 Share Posted April 13, 2009 V3.0 and later boards have the ability to drive low impedance injectors without resistors - whether it's an MS1 or 2. Quote Link to comment Share on other sites More sharing options...
boosted280 Posted April 14, 2009 Author Share Posted April 14, 2009 So I don't need any of them? I can just have wires? Quote Link to comment Share on other sites More sharing options...
mobythevan Posted April 14, 2009 Share Posted April 14, 2009 If you are connecting the pullup resistor for tach input trigger you need this resistor. If you have a v3 or v3.57 board then you can use PWM for low impedance injectors and do not need dropping resistors for the inejctors. Any resistors in that diagram that are not related to the injectors you will need to put in your installation. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.