Pete84 Posted May 11, 2009 Share Posted May 11, 2009 I believe there is some debris clogging my clutch hardline. Great pressure at the master cylinder, but almost none at the end of the hardline. I would prefer not spending more money on a new hardline, how can I clear it out? Took apart the master cylinder, tons of junk in the cylinder. Going to clean it out, see if it still seals up proper. Quote Link to comment Share on other sites More sharing options...
batou Posted May 12, 2009 Share Posted May 12, 2009 unhook both sides of the line and hit it with a high pressure blast from your air compressor a couple times till no more crap comes out. You can try putting a sock or something over the end to catch any solid crap that may come shooting out. Quote Link to comment Share on other sites More sharing options...
emeraldlion Posted May 12, 2009 Share Posted May 12, 2009 When I rebuilt my volkswagen van we took the whole line off and used a wire coat hanger unwound in a very lewd in-and-out manner to get junk out. We didn't have a compressor but sounds like the two combined would get 'em pretty clean. Coat hanger is really only if they're pretty crusty though Quote Link to comment Share on other sites More sharing options...
jonnymrp Posted May 13, 2009 Share Posted May 13, 2009 good call on cleaning the master out. clutch fluid in the eyes hurts, hurts alot. take care. Quote Link to comment Share on other sites More sharing options...
SHO-Z Posted May 13, 2009 Share Posted May 13, 2009 Also watch the fluid it makes great paint remover so watch were you blow the stuff out too. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.