cachanilla86 Posted May 30, 2009 Share Posted May 30, 2009 Yesterday I got a nice and clean Z32 leather seat(driver side), barely fits on my 280Z...but Its a good lookin' and cheap upgrade. (Next week I'll frabricate the mounts) Quote Link to comment Share on other sites More sharing options...
The love of JDM Posted May 31, 2009 Share Posted May 31, 2009 Pretty modern looks nice, the rest of the interior in black would set it off. Quote Link to comment Share on other sites More sharing options...
rigez Posted June 2, 2009 Share Posted June 2, 2009 Do you have the electric or manual seat adjust controls? Just curious because I have a set of the electric and was wondering on fit in regards to the controls and or pics. Quote Link to comment Share on other sites More sharing options...
zedsn Posted June 3, 2009 Share Posted June 3, 2009 Hi, can the head rest be removed? Quote Link to comment Share on other sites More sharing options...
the_dirtking Posted June 3, 2009 Share Posted June 3, 2009 How different do the seat rails look? Quote Link to comment Share on other sites More sharing options...
tonycharger72 Posted June 3, 2009 Share Posted June 3, 2009 Seats look really good mate! Do you have any pics of how you did the seat rails? Quote Link to comment Share on other sites More sharing options...
Jesse OBrien Posted June 3, 2009 Share Posted June 3, 2009 I definitely want to see what you make for rails. Are you going fixed location or sliding? Quote Link to comment Share on other sites More sharing options...
cachanilla86 Posted June 3, 2009 Author Share Posted June 3, 2009 *Its a manual seat, a Electric one may not fit 'cause its too wide *The head rest on my seat cannot be removed, altough I removed one on another seat *The rails are very different, and being a personal car Im going with fixed position. Quote Link to comment Share on other sites More sharing options...
the_dirtking Posted June 4, 2009 Share Posted June 4, 2009 Well im sure it'll be worth it, there are obviously a lot of seat switches on here, but that one looks really good. Are you gonna do the passenger? ,Ryan Quote Link to comment Share on other sites More sharing options...
cachanilla86 Posted June 11, 2009 Author Share Posted June 11, 2009 Well, this Afternoon I complete the installation of the 2 seats... Seat comparison The S30 seat rail almost fits the Z32 seat, One bolt will fit, altough the another one not. The bolts on the S30 are phillips head and the Z32 are 12mm. For this bolt, I used a self tapping 3/8" screw Ready: I did the same for the other rail and then took the seat and put it into the car, one side will fit correctly For the other, again, I used the 3/8 screw Now I have 2 "new" seats!! Its not a perfect fit, but is cheap, and almost a bolt On The bolsters hit the armrest a bit Quote Link to comment Share on other sites More sharing options...
MJLamberson Posted June 11, 2009 Share Posted June 11, 2009 Thats awesome! I really like it. Quote Link to comment Share on other sites More sharing options...
sshhinn Posted June 20, 2009 Share Posted June 20, 2009 nice! I saw post on CL in Los Angeles.. guy selling pair of z seats for $50! I might go buy them tomorrow!!! Quote Link to comment Share on other sites More sharing options...
slownrusty Posted June 20, 2009 Share Posted June 20, 2009 Sorry to be a critique but that small self tapping machine screw is not going to do anything to save your life in case you are involved in an accident. I am going through alot of pain staking measures to weld and properly modify my seat rails to properly fit a set of aftermarket seats. These types of project are more involved than most think. I know you are excited to install your new "parts" but safety first. Yasin Quote Link to comment Share on other sites More sharing options...
sweetleaf Posted June 20, 2009 Share Posted June 20, 2009 Sorry to be a critique but that small self tapping machine screw is not going to do anything to save your life in case you are involved in an accident. I am going through alot of pain staking measures to weld and properly modify my seat rails to properly fit a set of aftermarket seats. These types of project are more involved than most think. I know you are excited to install your new "parts" but safety first. Yasin +1 .. You beet me to it. That install is very unsafe. They'll definately come loose in an accident. Hell they might come loose in a hard corner. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.