Guest twentysixounce Posted June 28, 2009 Share Posted June 28, 2009 Ok, so all of the compression ratio info that I have seen only give the data for the E31 head used in combination with L24-L28 blocks. What CR could I expect with an L26 with stock bore and standard 1mm head gasket? I was lucky enough to find a virgin E31 head so I was thinking of using my L26 block instead of my L28/dished piston combo........... Quote Link to comment Share on other sites More sharing options...
thetremendoustim Posted June 29, 2009 Share Posted June 29, 2009 google http://www.csgnetwork.com/compcalc.html come on.... Quote Link to comment Share on other sites More sharing options...
PanzerAce Posted June 29, 2009 Share Posted June 29, 2009 http://www.ozdat.com/ozdatonline/enginedesign/ Quote Link to comment Share on other sites More sharing options...
Daeron Posted July 1, 2009 Share Posted July 1, 2009 some 260 blocks I have seen seem to come with dished 83mm pistons, some with flat tops. Naturally, you would want the flat-tops rather than the dished. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.