echocluster@hotmail.com Posted July 7, 2009 Share Posted July 7, 2009 I have a 71 z. It has an 83 motor with the 96 trany swap. I have a bully clutch that was made for the original 5 speed. When I start the car in gear with clutch fully engaged, it will pull forward. I have tried making the slave rod longer, increasing the pivot under the fork. When I fully engage clutch it looks like the fork cant go any further in the the slot that it fits in the side of the trany . Any idea's ? Quote Link to comment Share on other sites More sharing options...
MONGO510 Posted July 8, 2009 Share Posted July 8, 2009 T.O. brg To short? There are different sizes. Quote Link to comment Share on other sites More sharing options...
Mike C Posted July 11, 2009 Share Posted July 11, 2009 TO bearing itself is the same, but at least three different collars that slip into the bearing, and possibly three different clutch forks as well. You have to match the collar to the clutch and fork you are using. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.