JDTIPPIT Posted July 27, 2009 Share Posted July 27, 2009 Could some one tell me what size the bolts that connect the bellhousing to the engine would be please? I bought my engine and transmission seperate. I don't know what size bolts I need to purchase. Thanks for the help! Quote Link to comment Share on other sites More sharing options...
jay260z Posted July 27, 2009 Share Posted July 27, 2009 There a standard 3/8 bolt but depending on the bell ousing is how long the blots will need to be. I know on a gm bellhousing for a muncie the bolts below the guide pins are 2 1/4" and the others are 1 1/4" long. Just measure how thick the flange is on the bell housign and add about 3/4" to that and it will give u and idea of how long of bolts to use. Quote Link to comment Share on other sites More sharing options...
JDTIPPIT Posted July 27, 2009 Author Share Posted July 27, 2009 Thanks Jay! Quote Link to comment Share on other sites More sharing options...
deja Posted July 27, 2009 Share Posted July 27, 2009 A 4L60E to a LT1 there are five 2/3/8" and one 2" Quote Link to comment Share on other sites More sharing options...
JDTIPPIT Posted July 27, 2009 Author Share Posted July 27, 2009 I am about to find out if it is the same for the LT1 and a '68 327. Headed to ACE now. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.