JayBee280 Posted August 25, 2009 Share Posted August 25, 2009 I believe this is what caused it run like a dirty whore....but cannot shoot some advice on how to seal the leakeage causing the air flow meter hissing 78 280z stock Quote Link to comment Share on other sites More sharing options...
nismopick Posted August 25, 2009 Share Posted August 25, 2009 Well... have you taken it out and inspected it? Have you adjusted the idle screw? Have you checked the connection boots to make sure they are tight? n-e-e-d--m-o-r-e--i-n-f-o Quote Link to comment Share on other sites More sharing options...
JayBee280 Posted August 28, 2009 Author Share Posted August 28, 2009 FIRST OF ALL. you have way to many cars...give me one nah jk but it just all happened one day after i bled the slave cylinder and went to move it. well i went to check the afm cleaned the sensor with the maf cleaner. then noticed the cover that hides the electroics behind just fell off the side of it like i had little gremlins come tamper with my baby. but anyways it ran fine and revved happy like stock car than it all sprung on me. I changed the fuel filter thinking it was clogged but it needed to be changed it was nasty inside. but now it just revs to 2-3k and falls on her face and dies. 1978 280z all stock Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.