10cjennings Posted May 2, 2010 Share Posted May 2, 2010 I just purchased my first 240Z (JSM's Red '73), the car's great, but I have two quick questions. 1. Where can I find all the screw/bolt dimensions (or the screws/bolts themselves)for the following Interior panels: The plastic peices which go around the rear windows The piece where the dome light attaches The piece on the underside of the hatch 2. I'm trying to find the emblem which covers the two small holes in the hatch (mine currently has no emblems). Is it the "240Z" emblem or the "DATSUN" one which goes there? I have the two I'm referring to linked below. 240Z emblem DATSUN emblem Thanks, Chris J. Quote Link to comment Share on other sites More sharing options...
sticky280zx Posted May 2, 2010 Share Posted May 2, 2010 on the 280z's the hatch looks like this 280z Datsun But thats on the passenger side and the datsun is at an angle (best i rememeber) You can always call MSA during hours and they can tell you though. -Jeff Quote Link to comment Share on other sites More sharing options...
10cjennings Posted May 3, 2010 Author Share Posted May 3, 2010 (edited) The two holes are in a straight line, so it couldn't work with a diagonal badge, but on the 240 I think both are straight. Anyone else have any idea one which badge has the two pins which seal these holes? Edited May 3, 2010 by 10cjennings Quote Link to comment Share on other sites More sharing options...
rturbo 930 Posted May 3, 2010 Share Posted May 3, 2010 (edited) The two holes are in a straight line, so it couldn't work with a diagonal badge, but on the 240 I think both are straight. Anyone else have any idea one which badge has the two pins which seal these holes? The "Datsun" badge has three pins, and sits diagonally. The "240Z" badge has two pins, and sits horizontally below, and a tiny bit to the right of the "Datsun" badge. To try to put it into perspective, the 2 in 240Z is directly below the space between the T and the S in Datsun. Edited May 3, 2010 by rturbo 930 Quote Link to comment Share on other sites More sharing options...
Leon Posted May 3, 2010 Share Posted May 3, 2010 Quote Link to comment Share on other sites More sharing options...
10cjennings Posted May 3, 2010 Author Share Posted May 3, 2010 (edited) Ok, so it looks like it's the 240z emblem. Could anyone help me out on the interior bolts question? Thanks, Chris J. Edited May 3, 2010 by 10cjennings Quote Link to comment Share on other sites More sharing options...
rturbo 930 Posted May 3, 2010 Share Posted May 3, 2010 (edited) If I'm not mistaken, all the panels you mentioned are held in with plastic rivets. MSA (motorsport auto/thezstore.com) should sell them, but ModernS30 had a better solution to that, but I forget what it was. Hopefully he sees this thread. Edited May 3, 2010 by rturbo 930 Quote Link to comment Share on other sites More sharing options...
JSM Posted May 3, 2010 Share Posted May 3, 2010 Chris, did you find the bag of plastic rivits I gave you in the zip lock? You can also find those on ebay. This is what I gave you here: http://cgi.ebay.com/ebaymotors/20-DATSUN-TRIM-PANEL-RIVETS-90467-06054-_W0QQcmdZViewItemQQhashZitem439a07904eQQitemZ290346995790QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.