emeraldlion Posted August 11, 2010 Share Posted August 11, 2010 Looking to buy a JTR trans crossmember or something similar to it as well as the diff flange if anyone has one sitting around. Quote Link to comment Share on other sites More sharing options...
GOTHALOSISM Posted August 11, 2010 Share Posted August 11, 2010 I'm making my own mount. Just get some 3/8" steel and use a torch and a vice to bend it to the right specs. I'm not doing those fancy Exhaust piping "humps" since I will be doing side exhaust. Quote Link to comment Share on other sites More sharing options...
Administrators BRAAP Posted August 11, 2010 Administrators Share Posted August 11, 2010 Which trans are you using, T56 or 700R4? X-members are built different depending on the trans. Here's one for sale, only $65; http://www.jagsthatrun.com/Pages/Parts_DAT200.html Which diff do you have, there are 3 different flanges available that fit Z car diffs. I was able to find one for sale again very reasonable, no more than $70 http://www.jagsthatrun.com/Pages/Parts_DAT_driveshaft_flange.html Hope that helps, Paul Quote Link to comment Share on other sites More sharing options...
emeraldlion Posted August 11, 2010 Author Share Posted August 11, 2010 Wow, and I had a new guy jump on me and call me sarcastic. Thanks for the direction Paul but not exactly what I meant. You're right I wasn't specific enough. An auto xmember and 2.25 flange. Maybe it is ridiculous of me to think that a member may have pieces they didn't use. I always appreciate help and suggestions though. Quote Link to comment Share on other sites More sharing options...
Administrators BRAAP Posted August 11, 2010 Administrators Share Posted August 11, 2010 Wow, and I had a new guy jump on me and call me sarcastic. Thanks for the direction Paul but not exactly what I meant. You're right I wasn't specific enough. An auto xmember and 2.25 flange. Maybe it is ridiculous of me to think that a member may have pieces they didn't use. I always appreciate help and suggestions though. Sarcastic? Were you trying to be? Any how, just wasn't sure if you were aware they were still available new for reasonable prices. Every once in a while someone will post their JTR kit, or parts of it for sale. I think Mongo510 had some JTR bits for sale recently... Not sure exactly which bits they were though, might look through his for sale posts, he may still have them. Quote Link to comment Share on other sites More sharing options...
emeraldlion Posted August 12, 2010 Author Share Posted August 12, 2010 Yeah just mildly. But he asked if you could swap in a 302 and if the rear diff could handle the power so I couldn't resist. Like I said I will never turn down direction. I'll check mongo's threads and message him. Thanks again. Quote Link to comment Share on other sites More sharing options...
sticky280zx Posted August 12, 2010 Share Posted August 12, 2010 Hey man pretty sure i have the trans mount as well as speedo cable. I pretty much have the whole kit, less a few pieces i was told by a guy once....but i probably have them to just didnt recognize them as 'out of the ordinary' like i did the others. call or text me and ill let ya look em over, but i definately have no use for them Quote Link to comment Share on other sites More sharing options...
redneck1545 Posted August 19, 2010 Share Posted August 19, 2010 i have the differential flange...not sure about the diameter though...i believe it is the 2" though. I can check on that this weekend. PM me if your intrested and we can work something out...can also sandblast and prime if you'd like Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.