nagaz Posted November 26, 2010 Share Posted November 26, 2010 - To swap a R200 long nose into a s-30 chassis ( CV axle wise ) you will need: A. 87-89 300zx turbo cv axles + 4 bolt adapter on outboard side , B. 79 - 83 200zx cv axles + 6 bolt adapter C. 84-89 300zx N/A cut down & re-splined + adapter. Option A & B are easier but axles are impossible to find anymore - good luck! Option ( C.) will work but CV & axles are weaker than option A. & will cost more $ to put in place. To my knowledge these three CV axles have the only three stub shafts that will fit the R200 long nose without a later modle VLSD swapped in. please correct this info if I have it wrong. If you have a source for any of the CV axles above please post for all us R200 long nose "Z" swappers. NagaZ Quote Link to comment Share on other sites More sharing options...
desert dog Posted November 27, 2010 Share Posted November 27, 2010 My link Quote Link to comment Share on other sites More sharing options...
nagaz Posted November 28, 2010 Author Share Posted November 28, 2010 My link Item not avaliable form auto zone - nagaz Quote Link to comment Share on other sites More sharing options...
BLOZ UP Posted November 28, 2010 Share Posted November 28, 2010 There's some here in TX. I have a few pairs. Not for sale You can still get them from the auto parts store, reman'd, but available. At least here. Quote Link to comment Share on other sites More sharing options...
desert dog Posted November 28, 2010 Share Posted November 28, 2010 They are available here at NAPA, Auto Zone and O'Reilly's... Quote Link to comment Share on other sites More sharing options...
nagaz Posted November 29, 2010 Author Share Posted November 29, 2010 They are available here at NAPA, Auto Zone and O'Reilly's... DD , Very competent Napa parts tech tryed a national search - can get only right side. there were (4) in the entire USA!! If you can confirm that you can get them in Texas pm me a phone # asap Please! Quote Link to comment Share on other sites More sharing options...
sta Posted November 29, 2010 Share Posted November 29, 2010 DD , Very competent Napa parts tech tryed a national search - can get only right side. there were (4) in the entire USA!! If you can confirm that you can get them in Texas pm me a phone # asap Please! I have run into the same issue. I purchased the right side remanufactured z31 CV half shaft through an online parts store, and I have located a driver's side from a used parts source (junkyard). A1 Cardone will remanufacture the drivers side CV halfshaft if you provide a suitable core to work from. Quote Link to comment Share on other sites More sharing options...
rossman Posted November 29, 2010 Share Posted November 29, 2010 Be aware that the left and right are slightly different lengths. Some rebuilders get the parts mixed up. Quote Link to comment Share on other sites More sharing options...
nagaz Posted November 29, 2010 Author Share Posted November 29, 2010 yea ! can get right side - left side is not avaliable - period ! I'v been to at least 20 different dismantlers over the last four + months and not a single 300 zx turbo - there all N/A - beyond frustrating! Nagaz Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.