softopz Posted April 26, 2011 Share Posted April 26, 2011 SO I got the kit they (mckinneymotorsports) machined the bellhousing too. When I sent the bellhousing to MM I left the shim (thrust bearing washer) in the bellhousing and now I dont have one. I called nissan figured out which part I need and now hes asking me for thickness I believe he says it range from 0.8 to 1.4.... which one comes factory ? or do I measure the tolerance of play... than figure it out Quote Link to comment Share on other sites More sharing options...
softopz Posted May 1, 2011 Author Share Posted May 1, 2011 ANYONE??>?!? Quote Link to comment Share on other sites More sharing options...
RB26powered74zcar Posted May 1, 2011 Share Posted May 1, 2011 I called nissan figured out which part I need and now hes asking me for thickness I believe he says it range from 0.8 to 1.4.... which one comes factory ? or do I measure the tolerance of play... than figure it out I think you answered your own question... I doubt there is "one" particular size used from the factory, so you'll prolly have to figure out what thickness yours requires... Sorry, that's all I got. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.