Jump to content
HybridZ

clayton 260Z

Members
  • Posts

    28
  • Joined

  • Last visited

About clayton 260Z

  • Birthday 11/16/1956

clayton 260Z's Achievements

Newbie

Newbie (1/14)

10

Reputation

  1. already found both, Roger @ Z Barn. Thanks
  2. I need drivers and passenger side window regulators for my car, years 74 thru 76 will work. Please let me know. Thanks, Mike
  3. Ajthib, Your window regulator will need to be from a 74-76 year date the 77-78 will not work. Mike
  4. g9m3c, The electric fuel pump was added to help with fuel delevery when the car was hot and to try and help with vapor lock issues, it only starts working when the starter is engaged I believe. It is located in front of the tank and is a pusher. Under normal use the mechanical pump should work fine without the electric. I use a carter electric pump all on its own with a fuel regulator set at 3 psi with SU carbs. Mike
  5. Dylan, http://s183.photobucket.com/albums/x304/clayton260Z/?action=view&current=zcar011.jpg
  6. MSA type ll http://s183.photobucket.com/albums/x304/clayton260Z/?action=view&current=Dads1974260Z004.jpg http://s183.photobucket.com/albums/x304/clayton260Z/?action=view&current=Dads1974260Z008.jpg
  7. 09/73 build date 1974 260z Michael Clayton Murrells Inlet, South Carolina http://i183.photobucket.com/albums/x304/clayton260Z/zcar011.jpg
  8. Just another view. http://s183.photobucket.com/albums/x304/clayton260Z/?action=view&current=zcar026.jpg
  9. 74 260Z early Build 9-73 http://s183.photobucket.com/albums/x304/clayton260Z/?action=view&current=zcar011.jpg http://s183.photobucket.com/albums/x304/clayton260Z/?action=view&current=zcar007.jpg
  10. COmputoman, I have an early model 260z with the 240z style grill, to put a 280z style grill in you would have to add mounting tabs as these are different. So to say you could change from the 280z stlye to an early style 260z grill is yes just some mounting tab changes would be in order. I am not an expert but I believe that it should be able to be done with not much problems. Mike
  11. No, you must remove the bolts and jack the motor slightly, this will allow the front of the pan to clear the crank.
  12. The stitching is black on this, photo does not show it well............
  13. Thanks for the comments, We used a vinyl carbon fiber look, the dash had some good grand canyon cracks that we filled with foam and a plastic bumper filler to try and stablize it. Believe it or not no pattern was used the first one fit. The problems came with the fit of the gauges and the other components in the dash, some careful cutting on these to fit, the tach and speedo were set closer to the front, the three center gauges came from the back no problem. The center vent surround had to be trimed on the edges and a little use of black caulk finished it off. All in all it came out good. The transmission tunnel, center of the seats and a speaker box in the back all match. I do like the look.. If i can help anymore let me know. Mike Going to Reynolds Ga for the DNI on sunday hope to see some nice cars.
  14. The dash cover was made by a friend and installed, the gauges were done by me.
×
×
  • Create New...