toolman

patching trans tunnel welding right side floor in Got back from a trip to Japan. More patching in the transmission tunnel. Some were rust related and others were from the previous transmission mounting holes. Welding the right side floor panel in was easier than the left side as it had less corrosion.

While in Tokyo last week, I came across this Japanese 240z body kit. It consists of 11 fiberglass body parts. A 240z with this kit won the Tokyo Auto Salon for Best Body. I really like how the panels flow smoothly from front to back. Sunny

right side floor pan template redneck sheet metal brake-1 redneck sheet metal brake-2 floor pan sheet metal shape template test fit for floor pan I constructed a redneck sheet metal brake for making the floor pan. Using c-claps, vise grips, steel tubing and steel plates. It did the job. I made a sheet metal shape template to aid in creating the slope in the floor plan. A narrow about 1" wide was hand bend to match the shape of the existing pan. The floor pan was then test fitted. The floor pan will be trimmed and attached with cleco clips.

The passenger side floor pan is being cut off. Note a gap of about 1" is being left around all of the sides. This should provide a much easier time of installing the new floor pan.

Those slotted holes in the front cross member are for an eccentric bolt that provides about one degree of camber adjustment. At the time, I had access to automotive wheel alignment machine so I slotted the hole while checking the camber. Now days, everybody is going to slotted camber plates on the top of the struts. This was done in the mid 70's when only aluminum eccentric camber bushings were available. Good catch!