Jump to content
HybridZ

Rosco

Members
 View Profile  See their activity

  • Posts

    128

  • Joined

  • Last visited

 Content Type 

Everything posted by Rosco

  1. Rosco
    I'm heading to VIR this Friday if you want to check it out. The z obviously isn't ready so I'm taking the STI.
  2. Rosco
    A little flare mounting party this weekend. Not much left to do except wait for the air temp to get above 50 so we can paint. Come on warm weather!
  3. Rosco
    R7's, 245/40/17. That's the biggest tire I could fit on these 7.5" rims. Next session I'll get bigger rims
  4. Rosco
    Mounted the new rubber today
  5. Rosco
    Well it's slow going on the z project... But they got a black sealer coat and primer coat on.
  6. Rosco
    I have a wire harness out of a 1975 280z if that would work?
  7. Rosco
    I put the cover and stubs back on the 4.11 this weekend.
  8. Rosco
    Not sure if the setup is your issue. My OSGeiken LSD is noisey after it gets warmed up. It chaters You could spend $70 to ship it somewhere, $200 to reset it, another $70 to ship it back and have the same issue. If you know it's not set up correctly then the money would be worth it. I only know of 2 places willing to set up an R200 long nose but I'm sure someone near you can as well. East Coast Gear Supply in Raleigh NC, and http://www.gounitrax.com
  9. Rosco
    Got it! Thanks
  10. Rosco
    Found one! "East Coast Gear Supply" set up my R200 for $200.
  11. Rosco
    What do you think about this color?
  12. Rosco
    They found the original primer!
  13. Rosco
    Makes sense, I removed them and installed Aluminum angle on the inside from top to bottom attaching them to the rim of the hatch and center of the glass. (see pic below) Thanks for the heads up
  14. Rosco
    Stan put flat stock on the outside, I changed it to angle on the inside. Thanks for the heads-up. BTW Stan did an excellent job with the custom flat spots for the vents, extra support for the wing pedestal, packaging, aircraft grade hardware… very impressed
  15. Rosco
    Here's the hood on the car
  16. Rosco
    Added some supports for the plexiglass and drilled the holes for the APR wing this weekend.
  17. Rosco
    Stripper party at the house this weekend
  18. Rosco
    I have an R200 that I'd like to swap the R&P from a 3.54 to a 4.11. Does anyone know of a shop or person near Raleigh that has experience with R200? Thanks
  19. Rosco
    Benchmark Composites Did a great job packaging the CF hood and Hatch. I told them I had vents and a wing I wanted to install and they accommodated by creating a flat spot on the backside of the hood for the vents and added support to the back of the hatch where the wing attaches. I cut and installed the vents yesterday, they look great!
  20. Rosco
    Here are more cage fabrication pics. We fitted me in the car for seat and steering wheel placement. That was fun! can't wait to get back on track.
  21. Rosco
    Thanks for the heads up we'll look into pushing them forward. I don't need the side markers anyway it's a dedicated track car
  22. Rosco
    Here you can see John has laid out the fender flares on the car. Ready for cutting!
  23. Rosco
    Here are some pics of the CF hood and hatch by Stan at "Benchmark Composites"
  24. Rosco
    I took the pics with an I phone and emails them to myself then uploaded them from my mac. I still don't know how to edit and rotate pics I already uploaded but I figured out that if I change the size of the pick before I up load it it showed upright
  25. Rosco
    How do I rotate the pictures I uploaded to a thread I started in members projects?
×
×
  • Create New...