wickiewicked240z

Enkei mesh wheels for $180.. 15x7 rear 0 offset with 3 inch lip and the front have a higher offset with 2 inch lip. before: Front wheels: Rear:not polished(left) and polished(right)

thanks for the great info, before i started my project i always felt that your post were very helpful.

I got a gallon of RUSTBULLET I did the whole inside of the 240z the bottom, the inside of the doors, i also used etching primer as a base for the rustbullet and i used PPG epoxy primer. and i used GATOR GUARD as my under coating, and for the inside of my front fenders.. Rustbullet was about $100 a gallon i used 1.

would 1 quart be enough to coat the 240z gas tank:?

They quoted me $360 dollars to seal the 240z gas tanks and clean and paint the out side. I think is way to much money. I think I might do this myself as for fuel tank sealers system which do you guys recomend and how much sealer would i need for the 240z gas tank. here are some brands im thinking of buying http://http://www.kbs-coatings.com/KBS-Auto-Fuel-Tank-Sealer-Kit-P88C38.aspx price$57.oo or http://http://www.por15.com/bSPECIAL-Quart-of-Fuel-Tank-Sealer-Quart-of-Metal-Ready-b?sc=2&category=180 Price $42.45 or

I used a cut off wheel to cut the hood when i installed my 280zx hood vents. and take your time allow the metal to cool down

Heres the motor with valve cover,intake and the throttle shafts and fuel lines

Just picked up my intake, valve cover and balance tube from the polisher. Total cost was $135 less than a week turn around RIVERSIDE WHEELS 8990 Cottage ave. Suite A Rancho cucamonga, CA 91730 (909)989-1267 ask for Alfy Here are the pictures BEFORE: AFTER:

the good old days of removing the rust. same techniq i used when replacing the door pillar rust holes

delete please

Those are pictures from the website they don't have any bigger ones. Heres the link japanese to english.. http://www.google.com/translate?u=www.aritaspeed.com&langpair=ja%7Cen&hl=en&ie=UTF8

$5,000... I lost track I think i got over $6,000 and im still not done. Tools are pretty pricey If you go stock $5000 is pretty good but adding new parts aftermarket parts get's very expensive.

G nose Front bumper spoiler ￥36,750--$298.72 Rear bumper spoiler ￥42,000--$341.35 Side step 1SET￥47,250--$384.03 G nose ￥47,250--$384.03 The porsche type rear wing￥26,250--$213.32 S130 ◆S130◆ Front bumper spoiler Rear bumper spoiler Side step Set price ￥84,000 $682.64

those side skirts are made by YAMATO Inc. flares are ZG flares. and im looking for the front air dam

no powdercoat just regular high temperature paint only the side were painted not the top of the block

Before AFTER Only the head was rebuilt since it had bad valves. and the block was cleaned from all the oil resedue and i removed the carbon buildup on of the piston.

Over 500 race vehicles participated

Heading back Here are some scenic pics. I saw a bad accident after the second toll booth i think the people in the car died a saw some woman laiying on the front seat , air bad deployed and white cloth over her...

On these pictures i manage to get closer to the action since there were less security trying to keep you from getting hit by a car.

ROBBY GORDON This picture below is Robby Gordon nascar driver/baja racer sorry for the crappy pic.The helicopter pic is his personal media coverage that follows only him around the 500 miles of the race.