wickiewicked240z

artic white I think is chevy I don't remember

I have been busy on the car I have installed a new oil pan gasket and a 83zx clutch. Also made a grill for the front since the first one I made looked liked the grills from a bbq. I got some seat harness from Armand $150 good price since I lost one off my original seat belts and needed them so i just upgraded.Here are some pictures...forgot I installed my chrome bumpers front&rear shaved

Ok here is the deal i have L24 with a 83zx 5speed tranny. i just installed the a new 83zx clutch. Here is the problem when i have the car on and stop I try to shift into reverse and gear grind and it gets hard to shift I have clutch pedal press. Problem 2 when i have it in 1 or 2 gear just crusing no accelaration or with clutch not press It feels like the throwout bearing is grinding . I removed the clutch master cylinder and removed the rubber dust cap and saw just a little bit of oil could this be the problem, I have just replaced the slaver cylinder with a 83zx one using the stock 240z clutch master cylinder that came with the car.

Going to maricopa,Arizona tomorrow morning is there any junk yards in that area or in phoenix. Im also just thinking of just driving to flafstaff an go to the snowbowl to do some snowboarding.

what I found is 3 M10x1.5 bolts that are about 2 1/2 inches and one 2 inch M10x1.5 bolt

well today i went to snowsummit I started to learn how to ride switch since im Goofy had a great time.

http://www.tranceaddict.com/forums/showthread.php?threadid=442006&forumid=60& These idiots are so funny in these pictures, with orange faces. Hot girls...

post his address

raceonusa.com

how does the window kit work? Does the window go up quick or does it take long time also what kit did you use.

i'll take a set of the z31 cvs adaptors for the turbo axles to bolt on to the stubs axles.just the spacer to weld on to it.

http://www.stage6.com/ Go here and use the search button they have some of the episodes in high resolution and other type of media in high resolution

I live in the inland empire California just wanted to know if anyone knows a shop were i can take the 240z to get the carbs tuned? Something close willing to drive no more than 40 miles. Does anyone around here know how to tune them.

well yesterday i was leaving my uncles house. Got on the 605 freeway when I saw to cars crash into each other.I was about 2 or 3 car lenghts behind on the left and they were on the right of me. when one of them swerve on to my lane going 65mph i manage to turn to the left hitting the side of my car doing a 180 on to the carpool lane facing oncoming traffic. That was some scarry sh!t..both air bags deploid. So could this be repair by the insurance or are they going to call it a total loss. I don't want to be driving a car that has a bent body.

damn I just lost my dog Ginger I guess someone left the side door open and my 3 dogs got out and only 2 came back. This sucks good luck finding a good home.

Well going back to big bear this weekend for the 7th time and this is going to be my 3rd lesson 1hour private. I have the basic stuff down heel, toe edging and liking turns. I been all over the mountain except for the expert trails. I want to start doing some jumps just the small ones and carving. Just wanted to know how to ollie on the jumps and how to carve. So I can have and idea on how to do it. Also i have been thinking of buying a helmet at more than $100 i want to get something thats is not to big and is light with audio ear plugs since i like listening to music while on the trails to pump me up.

if i had enough money for red paint i would off gone with red instead of artic white, but at $300 to $400and up a gallon to much money.

why? because you want a better looking,faster Z car than the next guy.......

All red

Well today I decided to get my laizy ass up and work on the 240z. So I decided to install the aluminum hubs i got from ross. Since the ARP bolts that came with the hubs were to long for the lugs i had, I had to buy shorter bolts. I decide to stay stock front brake system for now i started drilling the stock 240z rotor because the hubs are 5 bolts and the stock are 4 and It work perfectly.

2006 GM colors 906328 Sunset orange mica b/c-258L/54 6218 Sunburst orange met b/c-913L/56 62608 Sunburst orange met b/c-802K/85 5677 Sunset orange met b/c-633H/71

well my 240z custom 5x4.75 aluminum hubs arrive today here are some pictures. The product looks great thanks ROSS,that FAST ORANGE really comes in handy.

Great stuff. Well me im receiving my custom aluminum hubs from ross on thursday thats about it for the z. As for my presents I got a snowboard last week from my dad early present.

I have been so laizy on the weekdays after work i havent done nothing to the car. An since i have taken on snowboarding on the weekends i have no money or time eighter. But some good news is that my Custom 5X4.75 aluminum hubs from ROSS are going to be arriving on the 27 of Dec. I have also made some panels for the inside of the car that will hold down the carpet on bottom edge on doors.I'll post some pictures when i have the bolts to bolt them up

Going back this saturday and talking a 1hour private lesson.